yuyaojinghaiboo yuyaojinghaiboo
Related Content Of Mist Pump Box... moreRelated Content Of Mist Pump Box
When using a spray pump, you need to press the wrench several times
before spraying the cleaning liquid from the nozzle of the spray pump. There are
two reasons for this lag:
When starting to draw fluid, the trigger gun should start a
downward stroke, not an upward stroke (the piston is outside the hydraulic
chamber). When you pull the wrench back for the first time, the piston is pushed
in, but no liquid is drawn out; there is only air in the hydraulic chamber. The
piston slides out by itself to suck out the liquid from the
reservoir.
When the piston begins its first upward stroke, the pump starts
to draw cleaning fluid from the Mist Pump Box . But at the same time, it also sucked up the air in the plastic tube
connected to the reservoir. Before you start spraying the cleaning fluid, you
need to use the pump mechanism to remove the air. Therefore, you may need to
move the wrench back and forth several times.
The above content is organized and shar... less
Member Info
- Profile Type: Regular Member
- Profile Views: 289 views
- Followers: 0 followers
- Last Update: Thu at 1:41 AM
- Joined: Apr 26
Updates
The post was not added to the feed. Please check your privacy settings.
-
yuyaojinghaiboo yuyaojinghaiboo Common
Knowledge Of Lotion Pump
... moreCommon
Knowledge Of Lotion Pump
Common
knowledge of Lotion Pump :
1.
Distributors are divided into two types: piercing type and screw type, which are
divided into spray, foundation cream, emulsion pump head, aerosol valve, and
vacuum bottle in terms of function.
2.
The size of the pump head is determined by the caliber of the bottle body. The
spray standard is 12.5mm-24mm, and the water output is 0.1ml/time-0.2ml/time. It
is generally used for packaging of perfume, gel water and other commodities. The
length of the same reception can be determined according to the height of the
bottle.
3.
The standard scale of the emulsion pump head is larger from 16ml to 38ml, and
the water output is 0.28ml/time-3.1ml/time. It is generally used in creams and
scrubbing products.
4.
Special dispensers such as foam pump head and hand buckle spray head. The foam
pump head is a non-inflatable hand pressure pump head. It does not need to be
inflated to generate foam.... lessYuyao Jinhai Glass And Plastic Manufacturing Plant specializes in producing and wholesale a series of accessories such as glass balls, plastic balls and steel balls, which are widely used in many industries.- Thu at 1:41 AM
-
yuyaojinghaiboo yuyaojinghaiboo How Lotion Pump Works
... moreHow Lotion Pump Works
The working principle of Lotion Pump :
A pump is a machine that delivers fluid or pressurizes fluid. It
transmits the mechanical energy of the prime mover or other external energy to
the liquid, which is an increase in liquid energy. The pump is mainly used to
transport liquids such as water, oil, acid and alkali, emulsion, suspension and
liquid metal, as well as liquid, gas mixture and liquid containing suspended
solids. Atomizer converts water or other liquids into mist by atomizing. The
atomizer is not only used in the medical field, but also frequently used in
other fields. The atomization pump is a new mechanical device specially designed
by combining the characteristics of the two mechanical structures of the
atomizer and the pump. It has more efficient work efficiency, more professional
practical skills, and can meet a wider range of applications. [1]
The
compressed air produced by the compression pump is delivered to the atomization
bottle through the tube. The... lessYuyao Jinhai Glass And Plastic Manufacturing Plant specializes in producing and wholesale a series of accessories such as glass balls, plastic balls and steel balls, which are widely used in many industries.- Sep 17
-
yuyaojinghaiboo yuyaojinghaiboo Plastic Balls Wholesaler Introduces The Treatment Knowledge Of Moldy Rubber Ring
... morePlastic Balls Wholesaler Introduces The Treatment Knowledge Of Moldy Rubber Ring
The washing machine is one of the appliances that are used very
frequently in our family life, but many people do n’t know that if the washing
machine is used for a long time and it has not been cleaned properly, the washed
clothes will not be clean, and it will cover a lot. Bacteria that are not
visible to the naked eye, the rubber ring of the washing machine is prone to
mold if used for a long time. Let's follow the Plastic Balls Wholesaler to see why the
rubber ring of the washing machine is moldy.
The mold of the rubber ring of the washing machine is caused by
long-term humidity. Afterwards, each time you finish washing the clothes, open
the door, wait for the water to dry, and then close it. This will evaporate the
residual moisture in the washing machine and will not regenerate mold. To a
large extent, the musty smell of the washing machine is eliminated. The other
thing is that the washing machine must n... lessYuyao Jinhai Glass And Plastic Manufacturing Plant specializes in producing and wholesale a series of accessories such as glass balls, plastic balls and steel balls, which are widely used in many industries.- Sep 9
-
yuyaojinghaiboo yuyaojinghaiboo Tips For Selecting The Pump Head Of Lotion Pump
... moreTips For Selecting The Pump Head Of Lotion Pump
Basically, every female friend at work now needs makeup to show her
beauty to her colleagues. This is also to welcome a better day, look good, and
feel better about everything. And the Lotion Pump is included in many cosmetics. Would you like to know how to
choose?
1. Look at the quality
Generally this pump head is already
equipped by the merchant. But you can choose to try it first and choose a better
pump head, which will be more comfortable to use and not prone to
problems.
Two, choose external
It is best to choose an external one, so
that the liquid will come out through people's pressure, which is much better
than a spring. If there is plastic, it is best to use this material so that it
will not be broken.
The above content is organized and shared by Steel Balls Wholesaler ,
hoping to help those in need. lessYuyao Jinhai Glass And Plastic Manufacturing Plant specializes in producing and wholesale a series of accessories such as glass balls, plastic balls and steel balls, which are widely used in many industries.- Aug 27
-
yuyaojinghaiboo yuyaojinghaiboo Lotion Pump Manufacturers Share What Is A Pump Head
... moreLotion Pump Manufacturers Share What Is A Pump Head
Lotion
Pump manufacturer introduced that the working principle of the pump head is
the same as that of the piston pump. It also uses the movement of the piston and
the opening of the single-phase valve to close the air discharged from the
liquid barrel to cause internal and external pressure rubbing, so that the
liquid rises under atmospheric pressure. There is a push-type liquid suction
mechanism in the hand sanitizer bottle that is discharged from the liquid outlet
pipe, which is mainly composed of a catheter, a radial leaf ball valve, a spring
yellow, a hollow plunger, a piston, a liquid outlet pipe, and a barrel
liquid.
When the liquid is pressed down by hand, the pressure in the
liquid in the barrel has been high, and the spring is compressed and the leaf
stem valve is closed. At the same time, because the piston moves downward, the
liquid outlet hole on the hollow plunger is opened, and the liquid is removed.
The liquid in the hol... lessYuyao Jinhai Glass And Plastic Manufacturing Plant specializes in producing and wholesale a series of accessories such as glass balls, plastic balls and steel balls, which are widely used in many industries.- Aug 20
-
yuyaojinghaiboo yuyaojinghaiboo The Manufacturer Of Lotion Pump Introduces The Inspection Requirements For
The Appearance Of Cosmetic Packaging Materials
... moreThe Manufacturer Of Lotion Pump Introduces The Inspection Requirements For
The Appearance Of Cosmetic Packaging Materials
The manufacturer of Lotion Pump
introduces the appearance inspection process of cosmetic packaging
materials:
1. All printed copywriting on the package is consistent with the
sample copywriting, and there are no typos or omissions.
2. There is no
obvious color difference in the color of the same batch of packaging materials,
and the color printing is not rough.
3. The surface of the packaging material
is smooth, flat and clean, without wrinkles, roughness, unevenness, and no
obvious scratches or abrasions.
4. There is no glue overflow in the packaging
materials that use glue.
5. There are no burst corners and edges around the
packaging material.
6. Appropriate length of pump head suction tube; standard
incision.
The above content is organized and shared by Plastic Balls Wholesaler , hoping to
help those in need. lessYuyao Jinhai Glass And Plastic Manufacturing Plant specializes in producing and wholesale a series of accessories such as glass balls, plastic balls and steel balls, which are widely used in many industries.- Aug 12
-
yuyaojinghaiboo yuyaojinghaiboo Related Content Of Mist Pump Box
... moreRelated Content Of Mist Pump Box
When using a spray pump, you need to press the wrench several times
before spraying the cleaning liquid from the nozzle of the spray pump. There are
two reasons for this lag:
When starting to draw fluid, the trigger gun should start a
downward stroke, not an upward stroke (the piston is outside the hydraulic
chamber). When you pull the wrench back for the first time, the piston is pushed
in, but no liquid is drawn out; there is only air in the hydraulic chamber. The
piston slides out by itself to suck out the liquid from the
reservoir.
When the piston begins its first upward stroke, the pump starts
to draw cleaning fluid from the Mist Pump Box . But at the same time, it also sucked up the air in the plastic tube
connected to the reservoir. Before you start spraying the cleaning fluid, you
need to use the pump mechanism to remove the air. Therefore, you may need to
move the wrench back and forth several times.
The above content is organized and shar... less- Aug 5
-
yuyaojinghaiboo yuyaojinghaiboo Lotion
Pump Manufacturer Shares Characteristics Of Pump Head
... moreLotion
Pump Manufacturer Shares Characteristics Of Pump Head
The
Lotion Pump manufacturer
will share the content of the pump head of the cosmetic bottle.
1.
The dispenser is divided into two types: the mouth type and the screw type. From
the function point of view, it is divided into spray, foundation cream, emulsion
pump, aerosol valve, and vacuum bottle.
2.
The size of the pump head is determined by the caliber of the matching bottle.
The spray specification is 12.5mm-24mm, and the water output is 0.1ml /
time-0.2ml / time. It is generally used for perfume, gel water and other product
packaging. The length of the same takeover can be determined according to the
height of the bottle.
The
above content is organized and shared by Plastic Balls Wholesaler ,hoping
to help those in need. less- Jul 31
-
yuyaojinghaiboo yuyaojinghaiboo What Is The Tightness Of The Lotion Pump
... moreWhat Is The Tightness Of The Lotion Pump
Inspection standard of Lotion Pump head:
1. Bottle mouth diameter: 43/410 40/410
2. Color: white and transparent colors are conventional colors,
other colors are made according to the color version provided by the
customer
3. Pumped dose: 0.4±0.1/0.8±0.15g/1.6±0.15g
4: The first pumping water: ≤6 times
5: Pressing feel: the speed of rebound and hand synchronization,
time <1.5 seconds
6: Tightness: the bottle is filled (water. emulsion) and the
product is locked, positive pressure test: within 2.5 minutes of 2.5KG positive
pressure bottle body, or reverse pressure test: vacuum pressure is not negative
within 0.05Mpa/5 minutes Give way.
7: Straw length: length ± 2MM
8: Foam standard: The liquid effect of the pump head is foam,
the foam should be full, delicate and even. (Note: For different formulations of
liquid, the foam effect will change).
9: Service life: ≥1000 times
10. Material: PP
The above is organize... lessYuyao Jinhai Glass And Plastic Manufacturing Plant specializes in producing and wholesale a series of accessories such as glass balls, plastic balls and steel balls, which are widely used in many industries.- Jul 17
-
yuyaojinghaiboo yuyaojinghaiboo Advantages Of Pe Tubes
... moreAdvantages Of Pe Tubes
In the current society, Pe
Tubes is a new type of decorative material. The main feature is that it is
very light, and it is fireproof, waterproof, mothproof, mildewproof, and
crackproof. In terms of construction, the staff is easy to operate and suitable
for various indoor and outdoor decorative materials. It is a new type of green
decorative material! Its characteristics are as follows:
1. Low cost: low construction cost and simple decoration. The surface coating
has been completed, which can be sawed, nailed, and glued, which saves 80% of
the construction cost compared with wood, cement and gypsum products. (The
construction method is exactly the same as wood)
2. Environmental protection: the use of synthetic fibers as raw materials
reduces the deforestation of forests and reaches the national standard for
non-toxic and harmless green products for engineering decoration.
3. Fire resistance: It can completely achieve the characteristics of
non-spontaneous combustion... less- Jul 10
-
yuyaojinghaiboo yuyaojinghaiboo Glass Ball Manufacturer Shares The Characteristics Of Crystal
Ball
... moreGlass Ball Manufacturer Shares The Characteristics Of Crystal
Ball
When you buy a crystal ball, you can see that the sphere is very
large at first glance, and then you can surely be a glass imitation without
hesitation. Natural crystal balls are generally small in diameter, usually 2 cm
to 5 cm, pure crystal balls with a diameter of 10 cm are the top grade in
natural crystal balls, and crystal balls with a diameter of 20 cm are very rare.
So seeing the big crystal ball must be an imitation. Below, Glass Ball Manufacturer will share the
difference between glass ball and crystal ball:
1. Look at the inclusions
Due to the influence of the natural
crystal generation environment, natural crystal balls generally have cotton
flocs or cracks, or mineral inclusions. These cotton flocs are gas-liquid
inclusions observed with a magnifying glass. Mineral inclusions have certain
shapes and various types. Color; bubbles or agitated texture like agitated syrup
inside the imitation. So whenever you see bu... lessYuyao Jinhai Glass And Plastic Manufacturing Plant specializes in producing and wholesale a series of accessories such as glass balls, plastic balls and steel balls, which are widely used in many industries.- Jul 3
-
yuyaojinghaiboo yuyaojinghaiboo Glass Ball Manufacturer Shares The Temperature Of Rubber Products
... moreGlass Ball Manufacturer Shares The Temperature Of Rubber Products
What advantages does Glass Ball Manufacturer share in rubber
products?
Temperature range: －45℃～204℃
Advantages: · Excellent chemical
stability, resistant to most oils and solvents, especially various acids,
aliphatic hydrocarbon aromatic hydrocarbons and animal and vegetable oils ·
Excellent high temperature resistance · Good aging resistance · Excellent vacuum
performance · Excellent mechanical properties · Good electrical properties ·
Good permeability
Applicable medium: mineral oil, ASTM No. 1 oil IRM902 oil and
903 oil, non-flammable HFD hydraulic oil, silicone oil and silicon ester,
mineral and vegetable oil, fat, aliphatic hydrocarbon (butane, propane, natural
gas), aromatic hydrocarbon (toluene, di Toluene), chlorinated hydrocarbons
(trichloroethane, carbon tetrachloride), gasoline (including high alcohol
gasoline), high vacuum
The above content is organized and shared by Pe
Tubes
Manufacturers, hoping t... less- Jun 19
-
yuyaojinghaiboo yuyaojinghaiboo Glass Ball Manufacturer Shares Knowledge Of Rubber Seals
... moreGlass Ball Manufacturer Shares Knowledge Of Rubber Seals
With the increasing requirements for environmental protection,
automobile diversification, recyclable rubber, and heat resistance of materials,
Glass Ball Manufacturer
reminds that further cost reduction has become the main direction of
development of rubber products for automobiles.
Sealing products account for 25%-28% of the weight of automotive
rubber parts (except tires). Recently, EPDM adhesives with ozone resistance and
weathering resistance are widely used in automotive door and window sealing
strips, and gradually replace traditional NR and CR adhesives. Each car can use
various sealing strips with a length of 10-15 meters. In order to further reduce
costs and beautiful appearance, foreign manufacturers have used TPE materials to
manufacture automobile door and window sealing strips.
Rubber seals are a kind of universal basic components in sealing
devices. They play a very important role in the contradiction between leak... lessNinghai Ethan Lighting is China led street light housing manufacturers and die-cast aluminum light Housing suppliers. We specialize in producing high lumen, energy-saving, hot selling and sensor led street light housing.- Jun 12
-
yuyaojinghaiboo yuyaojinghaiboo Pe Tubes' Repair Tips
... morePe Tubes' Repair Tips
Pe
Tubes
are often damaged due to the pipe fittings or external reasons during the
connection process with the PE pipe. If the damage is serious, the accessories
will be replaced. If the damage is not large, the PE pipe should be repaired in
time to avoid expansion damage. Pipeline construction brings unnecessary
trouble.
When there are cracks or holes in the outer wall of Pe Tubes
or smaller parts within 0.02m, you can first remove the water in the tube, clean
the damaged parts with cotton yarn, and then use cyclohexanone to brush the base
surface and paint with good water resistance. Plastic adhesive, and remove the
plates of similar shape and size from the corresponding parts of the unused
pipes, bond them, wrap and fix them with geotextile, and restore the soil after
curing for 24 hours.
When the damaged part of the outer wall of Pe Tubes
shows that the wall of the pipe is broken or the hole is less than 0.1m long,
use a scraper to completely remove the brok... lessYuyao Jinhai Glass And Plastic Manufacturing Plant specializes in producing and wholesale a series of accessories such as glass balls, plastic balls and steel balls, which are widely used in many industries.- Jun 4
-
yuyaojinghaiboo yuyaojinghaiboo Glass Ball Manufacturer Shares The Quality Problems Of Glass Balls
... moreGlass Ball Manufacturer Shares The Quality Problems Of Glass Balls
What are the quality factors of Glass Ball Manufacturer ?
1. The appearance quality of the glass ball
The diameter of
the glass ball is 19.5 ± 7mm, and the roundness (the difference between the
largest radius and the smallest radius) is 0.5mm.
Dense small bubbles with a
diameter below 0.5mm are not allowed in the glass ball. Bubbles above 0.5mm: no
more than 15 non-alkali glass balls; no more than 10 medium-alkali
balls.
Stones and colored impurities are not allowed in the glass
ball.
The surface of the glass ball is not allowed to have a burst of more
than 5mm in diameter.
The surface of the glass ball must not be contaminated
with any oil, alkali powder, rust, serious pitting and other impurities that
cannot be cleaned.
The depth of the scissors scar of the glass ball shall not
exceed 0.5mm.
2. The inherent quality of the glass ball
The chemical
composition of the glass ball must be stable and meet the requirements of ... less- May 28
-
yuyaojinghaiboo yuyaojinghaiboo Glass Ball Manufacturer Shares The Creation Process Of Glass Balls
Glass Ball Manufacturer introduces the glass ball manufacturing process today.
... moreGlass Ball Manufacturer Shares The Creation Process Of Glass Balls
Glass Ball Manufacturer introduces the glass ball manufacturing process today.
The first thing to know is that the raw material for making
glass balls can only be glass. The glass is produced industrially. The raw
materials are mainly quartz sand, feldspar, calcite, thenardite, etc. These 100
ores must be heated to more than a thousand degrees to form a glass
liquid.
Secondly, qualified glass liquid flows through the feeding tank
and flows out from the feeding port to form a material strand. The temperature
of the stock is generally 1150 ~ 1170 ℃ for medium-alkali glass balls, and 1200
~ 1220 ℃ for non-alkali glass.
Finally, the stock is cut into bulbs nearly 200 times per
minute. The ball blank passes through the chute, the ball divider, and is pulled
by the ball divider plate, rolls into different funnels respectively, and then
falls into the ball forming groove formed by the three rollers with the same
rotation dir... less- May 22
-
yuyaojinghaiboo yuyaojinghaiboo Pe Gasket Manufacturers Share The Classification Of Washers
... morePe Gasket Manufacturers Share The Classification Of Washers
Refers to the part between the connected piece and the nut. A
generally flat metal ring is used to protect the surface of the connected piece
from scratching by the nut and distribute the pressure of the nut on the
connected piece. What are the classifications of the gaskets? Today, Pe Gasket manufacturers will come and introduce
to you in detail what the classifications of gaskets are.
Washers are divided into: flat washer-C grade, large washer-A
and C grade, extra large washer-C grade, small washer-A grade, flat washer-A
grade, flat washer-chamfer type-A grade, high for steel structure Strength
washer, spherical washer, conical washer, square inclined washer for I-beam,
square inclined washer for channel steel, standard spring washer, light spring
washer, heavy spring washer, internal tooth lock washer, internal serrated lock
washer, External tooth lock washers, external serrated lock washers, single-ear
stop washers, binaura... lessYuyao Jinhai Glass And Plastic Manufacturing Plant specializes in producing and wholesale a series of accessories such as glass balls, plastic balls and steel balls, which are widely used in many industries.- May 14
-
yuyaojinghaiboo yuyaojinghaiboo Pe Gasket Manufacturers Share 7 Tips For Removing Odors
... morePe Gasket Manufacturers Share 7 Tips For Removing Odors
In daily life, we are often troubled by the faint smell of rubber
products, including the low odor of the rubber product production environment or
the rubber products in storage. In fact, there are always a lot of tips in life.
The following Pe Gasket manufacturer introduces ways to deal
with the odor of rubber products:
1. The flavor method is generally to add some spices to degrade or reduce
the odors of acids and alkoxy compounds produced during the processing or use of
various rubbers. The method is effective, but it cannot fundamentally solve the
problem.
2. The method of boiling water to remove odor has a long history. This
method can remove a small part of odor, but most of it cannot be removed, and
the root cannot be removed. After a period of time, the flavor will continue to
precipitate and volatilize. The boiled and deodorized method has high labor
cost, complicated process, long-lasting effect and gener... less- May 7
-
yuyaojinghaiboo yuyaojinghaiboo 10 Details Of Pe Tubes
In recent years, there have been more and more fields using Pe Tubes ,
which has led to the widespread use of pipes now. Of course, the ability to use ... more10 Details Of Pe Tubes
In recent years, there have been more and more fields using Pe Tubes ,
which has led to the widespread use of pipes now. Of course, the ability to use
such pipes extensively is inseparable from their own performance. It has no
performance advantages, so it is deeply loved by users and approved for use. In
order to better understand the unique performance characteristics of pipes and
facilitate future use.
1. Reliable connection: The PE polyethylene pipe system is
connected by electrothermal fusion, and the strength of the joint is higher than
the strength of the pipe body.
2. Good low-temperature impact resistance: The low-temperature
embrittlement temperature of polyethylene is very low, and it can be safely used
in the temperature range of -60-60 ℃. During winter construction, due to the
good impact resistance of the material, no brittleness of the pipe will
occur.
3. Good resistance to stress cracking: PE has low notch
sensitivity, high shear strength and e... less- Apr 26
-
yuyaojinghaiboo yuyaojinghaiboo has just signed up. Say hello!
- Apr 26
Loading ...
Info
Personal Information
- First Name yuyaojinghaiboo
- Last Name yuyaojinghaiboo
- Gender Male
- Birthday June 7, 1993
- Education Some College
Personal Details
-
About Me
Yuyao Jinh
ai Glass A nd Plastic Manufactu ring Plant
Address:Shilihu Vill age, Huang jiabu Town , Yuyao Ci ty, Zhejia ng Provinc e
Telephone:+86-0574-6 2030456
Mailbox:jh[email protected] vip.163.co m
Website:www.jhglassb all.com
Postal code：315400 - Mobile number 254001258