Updates

• 
  kim minseok created a new group:

  

  Features, Types and Uses of Conveyor Chain

  There are many kinds of chains, the conveyor chain https://www.getechain.com/product/conveyor-chain/ is different from other common chain forms, it has superior...  moreThere are many kinds of chains, the conveyor chain https://www.getechain.com/product/conveyor-chain/ is different from other common chain forms, it has superior performance, so it is widely used in various special places. It is understood that the conveyor chain highlights its wear resistance and corrosion resistance, some of which have good self-lubricating performance and can have a long service life without maintenance, thus obtaining places with high stress, wear-resistance and not frequent maintenance, such as industrial automatic production lines, high-precision transmission machinery, etc.
  
  There is a strict requirement in the production process of the conveyor chain, which is to prevent dust from entering and grease from flowing out of the hinge, so the chain must undergo strict pre-lubrication. Formally speaking, there are two types of conveyor chain: roller chain and sleeve chain. Most of the chains used in t...    less

  • Tue at 7:47 PM
• 
  kim minseok created a new group:

  

  Causes of Palm Oil Chain Corrosion

  When the equipment is used for a long time, each component will tend to age or gradually fail, as will palm oil chain https://www.getechain.com/product/palm-oil-cha...  moreWhen the equipment is used for a long time, each component will tend to age or gradually fail, as will palm oil chain https://www.getechain.com/product/palm-oil-chain/ . The common phenomenon is chain corrosion. Apart from time, what other reasons can lead to similar problems?
  
  1. Palm oil chain rusts due to lack of antirust treatment.
  
  In the production process of palm oil chain, operators did not carry out the anti-rust treatment in strict accordance with the production requirements and did not adopt anti-rust packaging. Once it comes into contact with corrosive liquid and gas, corrosion will occur.
  
  2. The palm oil chain rust is caused by the substandard quality of antirust oil.
  
  Even though products such as antirust lubricating oil and clean fire oil have been applied to palm oil chain, if the quality of the products does not meet the technical requirements, it will be in vain and will also cause the corrosion of p...    less

  • Mar 17
• 
  kim minseok created a new group:

  

  Welding Technology of China Chain Supplier

  In the process of using the chain, it is often required to weld the chain due to the needs of work. Chain welding is a relatively complicated work, which is not firm enough to affect the use of machinery, even affect production and cause accidents. The fo...  moreIn the process of using the chain, it is often required to weld the chain due to the needs of work. Chain welding is a relatively complicated work, which is not firm enough to affect the use of machinery, even affect production and cause accidents. The following China chain supplier https://www.getechain.com/ will tell you some precautions about chain welding.
  
  The welding method of the chain is usually laser welding, and the corresponding equipment is a laser cold welding machine. It can use high-energy laser pulses to locally heat the material. The energy of laser radiation diffuses into the material through the heat conduction to melt the material and form a specific molten pool.
  
  The laser welding used by the chain is a kind of welding technology, which is mainly used for welding precision parts. The welding speed is fast, the flat needle of the welding seam is beautiful, no treatment or simple treatment is required after welding, and th...    less

  • Mar 10
• 
  kim minseok created a new group:

  

  The Causes of Palm Oil Chain Fracture

  There are many reasons for palm oil chain(GETECHAIN) https://www.getechain.com/product/palm-oil-chain/ fracture, which may be that the sprocket and sprocket box...  moreThere are many reasons for palm oil chain(GETECHAIN) https://www.getechain.com/product/palm-oil-chain/ fracture, which may be that the sprocket and sprocket box do not meet the design requirements; It is also possible that palm oil chain may have quality problems. Or the tensile load of the chain exceeds the predicted range; It may even be the chain transmission speed, chain type selection, design problems of chain transmission, etc.
  
  All of the above factors will cause the hot palm oil chain to break during use. Among them, the main influencing factors are chain quality and actual installation design. Therefore, chain manufacturers should pay attention to quality and accuracy when producing palm oil chains.
  
  Accuracy is an important technical parameter and index to measure the quality of palm oil chain products. The accuracy is not allowed to affect the normal use or even scrap of the chain, so extra attention should ...    less

  • Mar 3
• 
  kim minseok created a new group:

  What Is The Main Steel of China Chain Factory

  High-strength chains are widely used in various types of mechanical transmission structures, especially in mechanical transmissions such as automobiles and motorcycles, which require high tensile, wear and corrosion resistance. Due to the structure of the...  moreHigh-strength chains are widely used in various types of mechanical transmission structures, especially in mechanical transmissions such as automobiles and motorcycles, which require high tensile, wear and corrosion resistance. Due to the structure of the high-strength chain (the links are connected by hinges) and the load during operation (with tight and loose edges), the normal failure mode of the transmission high-strength chain is the fatigue failure and high of the high-strength chain parts. The elongation of the strength chain.
  
  At present, the quality of high-strength chain parts in China chain factory https://www.getechain.com/ has been greatly improved compared with the 1970s and 1980s. Most of the high-strength chains produced by professional high-strength chain manufacturers with a certain scale have interchangeable sizes. Indicators such as static strength have reached the corresponding standard requirements. However, important q...    less

  • Feb 11
• 
  kim minseok created a new group:

  

  Better Storage Space for Leaf Chain

  If you don't use the leaf chain(GETECHAIN) https://www.getechain.com/product/leaf-chain/ for a long time, you should pay attention to the storage, which can prevent...  moreIf you don't use the leaf chain(GETECHAIN) https://www.getechain.com/product/leaf-chain/ for a long time, you should pay attention to the storage, which can prevent the leaf chain from rusting or being damaged. Then, for the storage of the leaf chain, where is the better place to store it and what is the emphasis? Here are some references for the leaf chain.
  
  The first point is to avoid putting it in a humid place because the leaf chain is metal and is easy to oxidize in humid places. Whether it is ready for sale or use, it will affect the quality of the leaf chain, thus affecting the use or sale.
  
  Second, do not store the leaf chain in a place where the temperature is too high or the light is direct. If the leaf chain is placed in a place where the temperature is too high or is directly irradiated by strong light, the leaf chain will expand with heat and contract with cold. After a long time, the volume of the product wil...    less

  • Jan 13
• 
  kim minseok created a new group:

  

  Increase Maintenance Costs for Leaf Chain

  In most cases, many companies ignore the importance of lubrication of the leaf chain(GETECHAIN) https://www.getechain.com/product/leaf-chain/ . Therefore, the servi...  moreIn most cases, many companies ignore the importance of lubrication of the leaf chain(GETECHAIN) https://www.getechain.com/product/leaf-chain/ . Therefore, the service life of the leaf chain is shortened and the frequency of replacing the whole set of chains is increased, thus increasing the maintenance cost. At present, most chains are adhered to the chain surface by high viscosity lubricating oil or grease. Although it can lubricate the chain teeth and chain surfaces, it can hardly penetrate into the chain pins, bushings and rollers. Most leaf chain failures are caused by the following factors:
  
  1. When the inside of the leaf chain is not sufficiently lubricated, wear and corrosion will occur and the chain will become loose or kinked.
  
  2. When the leaf chain runs at high speed, the centrifugal force will drop the lubricant attached to the surface, which cannot play the role of lubricating and protecting the leaf chain.
  
  3...    less

  • Jan 6
• 
  kim minseok created a new group:

  

  Improve Combinations Chains for Best Results

  Failure caused by wear of the combine chains(GETECHAIN) https://www.getechain.com/ is the most common and obvious form of expression. There are many reasons for this failure. The main...  moreFailure caused by wear of the combine chains(GETECHAIN) https://www.getechain.com/ is the most common and obvious form of expression. There are many reasons for this failure. The main reasons are poor material quality of the combine chains and improper operation of workers. The most easily worn parts of the combine chains are sprocket and pin shaft. The wear of these two parts is mainly due to insufficient local lubrication, so in order to avoid this phenomenon, operators should pay attention to check the lubrication effect frequently, add lubricating oil in time, check whether there is abrasive in the lubricating oil or change the lubrication method. After the sprocket is slightly worn, the sprocket can be reversely installed so that the lightly worn side faces the combine chains. In addition, if the use environment is harsh or the lubrication seal is not good, the hinge will be worn. Once the combine chains hinge is worn, the chain-link wi...    less

  • December 30, 2019
• 
  kim minseok created a new group:

  

  What Are The Consequences of Palm Oil Chain Wear

  The wear of palm oil chain(GETECHAIN) https://www.getechain.com/product/palm-oil-chain/ mainly occurs between the pin shaft and the sleeve. The wear causes the ...  moreThe wear of palm oil chain(GETECHAIN) https://www.getechain.com/product/palm-oil-chain/ mainly occurs between the pin shaft and the sleeve. The wear causes the gap to become larger and the palm oil chain to become longer until the chain cannot accurately mesh with the chain wheel, or the correct distance and timing cannot be maintained. Sometimes the wear between roller and sleeve or the wear between chain plate and guide plate will also lead to chain failure.
  
  Palm oil chain lengthening due to wear is a gradual process, which roughly includes three stages. The first stage is the initial running-in, which takes a relatively short time. The protruding points on the pin shaft and sleeve are worn away, and small eccentricity is also worn away. The second stage is stable and slow lubrication and wear. In this stage, the pin shaft is properly placed in the sleeve and the bearing area is properly and adequately lubricated. T...    less

  • December 16, 2019
• 
  kim minseok created a new group:

  

  China Chain Factory Has Made Many Breakthroughs in Materials

  The production of China chain factory(GETECHAIN) https://www.getechain.com/ can be said to be an extremely important component in the industrial production process and also an importa...  moreThe production of China chain factory(GETECHAIN) https://www.getechain.com/ can be said to be an extremely important component in the industrial production process and also an important transmission tool in the production process. After years of development, today's industrial chain is already rich in ideas in terms of varieties.
  
  For example, the most widely used precision roller chains, sleeve chains, or long pitch roller chains for transmission, etc. However, as far as its use is concerned, the current industrial chain is basically a transmission chain, and the transmission chain also has a transmission chain.
  
  However, the manufacturing technologies of these chains are basically mature and can reflect the reliability of industrial chains. For example, they are multi-tooth bearing and are safe and reliable during transportation. Moreover, compared with the traditional belt drive, the industrial chain is also more accurate and has higher t...    less

  • December 2, 2019
• 
  kim minseok created a new group:

  

  Preventing Pitch Deviation of Conveyor Chain

  In the process of industrial production, conveyor chain(GETECHAIN) https://www.getechain.com/product/conveyor-chain/
  products are basically quite common, becau...  moreIn the process of industrial production, conveyor chain(GETECHAIN) https://www.getechain.com/product/conveyor-chain/
  products are basically quite common, because as an important symbol of automated production, its role is irreplaceable. However, due to the transport chain itself and human use, it often breaks down from time to time.
  
  In many situations, the problem of tight and loose transmission occurs frequently in the transmission chain, which is generally caused by the abrasion of gears. Therefore, targeted measures should be taken to deal with it. Due to the deviation of the pitch of the conveyor chain and the small-batch processing, it is difficult to ensure the actual effect, including the diameter, roundness and other indicators.
  
  Once the pitch of the conveyor chain deviates, it can be improved by replacing the conveyor chain, and it is important to change several more to achieve the effect. Of course, as a s...    less

  • November 25, 2019
• 
  kim minseok has just signed up. Say hello!

  • November 25, 2019